Shelly LoRa Add-on

Unlock up to 5 km of reliable communication with the Shelly LoRa Add-on (EU868). Designed for Shelly Gen3 and Gen4 devices, it redefines long-range connectivity, delivering secure performance in open spaces and dependable operation even in challenging environments.

Break barriers and extend control where other technologies can’t reach. This compact add-on is perfect for automating infrastructure, managing remote facilities, or optimising precision agriculture. It supports custom scripts, giving you the flexibility to customise functionality for the specific use case. Easy to set up and transformative in its impact.

Note: To connect your Shelly LoRa Add-on, you will need at least two devices – one to transmit the signal and one to receive it. They work in pairs to send and receive data. Please ensure you have both for the initial setup.

---

⚠️Caution – Read Before Buying⚠️

• Before beginning the installation, please read this guide and any other documents accompanying the device carefully and completely
• Danger of electrocution. The mounting/installation of the device should be performed by a qualified person (electrician)
• Failure to follow the installation procedures could lead to malfunction, danger to your health and life, violation of the law or refusal of legal and/or commercial guarantee (if any)
• Allterco Robotics (makers of Shelly products) and Mann Enterprises LTD are not responsible for any loss or damage in case of incorrect installation or improper operation of this device due to failure to follow the user and safety instructions in the printed guide accompanying this product (also available in the resources section below)
• Do not connect the device to appliances exceeding the given max load.
• Use the device only with a power grid and appliances which comply with all applicable regulations. Short circuit in the power grid or any appliance connected to the device may damage the device.
• Before starting, wire check that the breakers are turned off and there is no voltage on their terminals. This can be done with a phase meter or multimeter. When you are sure that there is no voltage, you can start wiring the cables.

---

Features

• Effortless long-range communication – Stay connected up to 5 km with the power of an external antenna
• Advanced technology for ultimate reliability – Powered by LoRa for strong and efficient performance
• Seamless device integration – Works with specific Shelly Gen3 & Gen4 devices (after being updated to 1.6 firmware version)
• Designed for tough conditions – Operates reliably even in obstructed or hard-to-reach areas
• Quick & easy setup – Get started in just a few steps
• Customisable for your needs – Supports custom scripts to match specific use cases

Specifications

Size (HxWxD)	40x42x11 mm
Weight	10g
Mounting	Via the Shelly proprietary serial interface to connect to a Shelly compatible device
Shell material	Plastic
Shell color	Black
Ambient working temperature	-20 °C to 40 °C
Max. altitude	2000m
Power supply	3.3 V (from compatible Shelly device)
Power consumption	< 150 mW
Compatible devices	Shelly 1 Gen3
	Shelly 1PM Gen3
	Shelly 2PM Gen3
	Shelly EM Gen3
	Shelly Dimmer 0/1-10V PM Gen3
	Shelly DALI Dimmer Gen3
	Shelly 1 Gen4
	Shelly 1PM Gen4
	Shelly 2PM Gen4
RF band	EU868
Max. RF power	< 14 dBm
Range	Up to 5000m (Depends on local conditions)

Resources

• Shelly Product Documentation
• Printed User Guide (as found within the package)
• Declaration of Conformity
• EAN: 3800238071684

Handy Shelly Resources

• Shelly Cloud
• Shelly App
  • Apple App Store
  • Google Play
  • Huawei AppGallery
• Home Assistant Shelly Integration
• Shelly Community Forum
• Shelly Facebook Support Group
• Shelly Knowledgebase
• Shelly Device Finder (easy-to-use software to find Shelly devices in the local network)
• Shelly Developer API

Package Contents

• 1x Shelly LoRa Add-on
• 1x User guide