M5Stack Tab5

The M5Stack Tab5 is a developer-oriented, highly extensible portable IoT terminal development device that integrates a dual-SoC architecture and abundant hardware resources.

Its main controller is the RISC-V-based ESP32-P4 SoC, equipped with 16MB Flash and 32 MB PSRAM; the wireless module uses ESP32-C6-MINI-1U, supporting Wi-Fi 6 with an antenna system that can switch between a built-in 3D antenna and an external MMCX antenna port.

Tab5 features a 5′ 1280×720 IPS TFT display driven over MIPI-DSI, with touch input handled by the GT911 multi-touch controller (I²C). A MIPI-CSI-connected SC2356 2MP camera (1600×1200) enables HD video capture, image processing, and edge AI applications.

I/O and expansion include USB-A (Host) and USB-C (USB 2.0 OTG) ports for traditional peripherals; industrial communication via RS-485 (SIT3088 with switchable 120 Ω termination); 1x Grove, 1x M5BUS, GPIO_EXT header, and a Micro SD slot; plus a STAMP solder-pad for Cat.M/NB-IoT/LoRaWAN modules. A Reset/Boot button allows for quick reset and firmware flashing.

Audio/video uses an ES8388 audio codec with ES7210 AEC front end, dual-mic array, 3.5 mm jack, and 1W 8 Ω NS4150B speaker for recording and playback. The onboard BMI270 six-axis sensor (accel+gyro, interrupt wakeup) can trigger MCU wakeup on motion.

Time and power management integrate an RX8130CE real-time clock (interrupt wakeup); a 2S NP-F550 removable Li-ion battery (Kit option only); and IP2326 charging, MP4560 buck-boost, and INA226 real-time monitoring circuits to ensure stable operation without external power. A side-mounted Power button provides one-touch on/off.

Structure-wise, Tab5 features a side-mounted standard 1/4″-20 tripod mount nut for direct mounting to tripods or other supports.

Lithium Battery Shipping: Due to courier restrictions, the battery version of this product can only be shipped within the United Kingdom. With this item in your cart, your shipping options will be limited and may cost more than our usual rates. Why?

Features

• ESP32-P4 dual-core MCU
• ESP32-C6 wireless module
• Wi-Fi 6
• Built-in 3D antenna & MMCX external antenna port
• 5″ 720P MIPI-DSI display
• GT911 multi-touch
• SC2356 2 MP camera
• USB-A Host + USB-C OTG
• RS-485 industrial interface
• Grove & M5BUS expansion
• Micro SD card slot
• STAMP expansion pad
• ES8388 audio codec
• ES7210 AEC dual microphones
• 1W speaker + 3.5 mm jack
• BMI270 six-axis sensor
• RX8130CE real-time clock
• Reset/Boot & Power buttons
• NP-F550 2S removable battery
• Standard 1/4″-20 tripod mount nut
• Development platforms:
  • ESP-IDF

Specifications

Resources

• Product Wiki

Documentation

• ESP-IDF Tab5 User Demo
• ESP-IDF Tab5 User Demo Compilation
• Schematics PDF
• Overall Design Block Diagram
• Restore Factory Firmware
• M5Unified
• M5GFX

Datasheets

• ESP32-P4
• BMI270
• ESP32-C6
• NS4150B
• ES7210
• ES8388
• INA226
• IP2326
• NP‑F550 Battery Report

Package Contents

• Tab5 Kit (with battery)
  • 1x Tab5 Kit
  • 1x 1.25mm 6-pin single-ended terminal wire
  • 1x NP-F550 2S 2000 mAh removable lithium battery

• Tab5 Only (no battery)
  • 1x Tab5
  • 1x 1.25 6-pin single-ended terminal wire