Snap-In Panel Mount Cable – USB-A Socket to 2 Wires

This panel-mount cable is great for making USB power connections with a panel-mount setup. On the rectangular panel-mount side, you get a USB Type-A connector; the other end has power and ground lines. We particularly like that the panel-mount part is very small and snaps in, and you get a wire pigtail cable on the other end for quick integration.

What’s special about this, you ask? It’s a Snap-In Panel Mount Cable – much easier than a classic panel mount cable; you don’t need screws or drills for installation. Cut out a rectangular hole about 2cm by 1cm, up to 4mm thick, and then snap the panel in; it will fit snugly and cover up any burrs, so your cut doesn’t have to be so precise. Perfect for adding a USB A charging/power port to your project enclosure!

The red cable is 5V, and the black wire is ground. This one does not include data lines—it will just provide 5V power to a client device.

We also have a 4 wire version here

The Voltage Detector and cables are NOT included

Specifications

• Wire length: 4′