The Shelly 2PM Gen3 is a small form factor Wi-Fi-operated 2-channel smart switch (10A per channel/16A total) with precise power measurement which allows remote control of two devices or cover (roller) control, automating and adjusting the position of roller shutters, blinds, curtains, awnings, bi-directional AC motors. – all through a mobile phone, tablet, PC, or home automation system – and monitor their power usage!
It can work standalone in a local Wi-Fi network or it can also be operated through cloud home automation services.
Shelly 2PM Gen3 can be accessed, controlled and monitored remotely from any place where the user has internet connectivity, as long as the device is connected to a Wi-Fi router and the Internet. It can be retrofitted into some electrical wall boxes, behind power sockets and light switches or other places with limited space – including the Shelly Wall Switch 2.
Shelly 2PM Gen3 has an embedded web Interface which can be used to monitor and control the device, as well as adjust its settings.
Different types of actions, scenarios, and schedules can be set to sync your environment to your daily activities or business needs, via the Shelly smart home ecosystem, including the Shelly Smart Control app – or link it with a popular home automation software such as Home Assistant via a Raspberry Pi!
Note: You may require a neutral wire to use this product. Please research the device and your home wiring (safely, see below) before purchasing.
⚠️Caution – Read Before Buying⚠️
- Before beginning the installation, please read this guide and any other documents accompanying the device carefully and completely
- Danger of electrocution. The mounting/installation of the device should be performed by a qualified person (electrician)
- Failure to follow the installation procedures could lead to malfunction, danger to your health and life, violation of the law or refusal of legal and/or commercial guarantee (if any)
- Allterco Robotics (makers of Shelly products) and Mann Enterprises LTD are not responsible for any loss or damage in case of incorrect installation or improper operation of this device due to failure to follow the user and safety instructions in the printed guide accompanying this product (also available in the resources section below)
- Do not connect the device to appliances exceeding the given max load.
- Use the device only with a power grid and appliances which comply with all applicable regulations. Short circuit in the power grid or any appliance connected to the device may damage the device.
- Before starting, wire check that the breakers are turned off and there is no voltage on their terminals. This can be done with a phase meter or multimeter. When you are sure that there is no voltage, you can start wiring the cables.
Features
- 2 channels on the same phase
- Max switching voltage – 240VAC / 30VDC
- Max switching current AC – 10A per channel, 16A total
- Max switching current DC – 10A
- Power metering on each channel
- Cover (roller) control – Automate and adjust the position of roller shutters, blinds, curtains, awnings, bi-directional AC motors.
- Slats angle control – use with your venetian blinds and control the tilt position (angle) of slats to adjust the amount of light in a room.
- New processor – ESP-Shelly-C38F chip with an increased memory of 8 MB
- Improved durability of terminals
- Virtual components
- Wi-Fi range extender & Bluetooth gateway
- Supports scripting, webhooks, MQTT, WebSocket, HTTPS, UDP, TLS and custom certificates
- No HUB required! Easy control through Shelly Smart Control app, various home automation protocols, platforms, as well as voice assistants.
Specifications
| Size (HxWxD) | 37x42x16 ±0.5 mm |
| Mounting | Wall console |
| Screw terminal max torque | 0.4 Nm / 3.5 lbin |
| Conductor cross-section | 0.2 to 2.5 mm² / 24 to 14 AWG |
| Conductor stripped length | 6 to 7mm |
| Shell material | Plastic |
| Colour | Black |
| Ambient temperature | -20 °C to 40 °C / -5 °F to 105 °F |
| Humidity | 30 % to 70 % RH |
| Max. altitude | 2000 m / 6562 ft |
| Power supply | 110 – 240 VAC / 24 VDC ±10% |
| Power consumption | < 1.4 W |
| External protection | Tripping characteristic B or C, max. 16A max. rated current, min. 6 kA interrupting rating, energy limiting class 3 |
| Max switching voltage AC | 240 V |
| Max switching voltage DC | 30 V |
| Max switching current AC | 10 A (per channel) 16 A (total) 18 A (total peak) |
| Max switching current DC | 10 A |
| Internal-temperature sensor | Yes |
| Voltmeter (AC) | Yes |
| Ammeter (AC) | Yes |
| RF band | 2412 – 2472 MHz |
| Max. RF power | <20 dBm |
| Wi-Fi protocol | 802.11 b/g/n |
| Wi-Fi Range | Up to 30 m / 100 ft indoors Up to 50 m / 160 ft outdoors (Depends on local conditions) |
| Bluetooth Protocol | 4.2 |
| Bluetooth Range | Up to 10 m / 33 ft indoors Up to 30 m / 100 ft outdoors (Depends on local conditions) |
| CPU | ESP-Shelly-C38F |
| Flash | 8 MB |
| Schedules | 20 |
| Webhooks (URL actions) | 20 with 5 URLs per hook |
| Scripting | Yes |
| MQTT | Yes |
Resources
- Shelly Product Documentation
- Printed User Guide (as found within the package)
- Web interface guide
- Components and APIs
- Declaration of Conformity
- Device Identification
- Device name: Shelly 2PM Gen3
- Device model: S3SW-002P16EU
- Device SSID: Shelly2PMG3-XXXXXXXXXXXX
- BLE Model ID: 0x1005
- EAN: 3800235261903
Handy Shelly Resources
- Shelly Cloud
- Shelly App
- Apple App Store
- Google Play
- Huawei AppGallery
- Home Assistant Shelly Integration
- Shelly Community Forum
- Shelly Facebook Support Group
- Shelly Knowledgebase
- Shelly Device Finder (easy-to-use software to find Shelly devices in the local network)
- Shelly Developer API
Package Contents
- 1x Shelly 2PM Gen3
- 1x User Guide



Reviews
There are no reviews yet.