Shelly Wall Switch 4

The Shelly Wall Switch 4 is a 4-button wall switch, offering a physical switch with which you can control your Shelly smart home ecosystem, including the Shelly Smart Control app – or link it with a popular home automation software such as Home Assistant via a Raspberry Pi!

The wall switch can control up to four circuits, two dimmers, or two motorised roller shutters in both directions via a Shelly Plus series relay or i4 input device (sold separately).

Featuring compact dimensions and simple, intuitive wiring requirements, the Shelly Wall Switch 4 can be affixed anywhere with the help of a Shelly Wall Frame 2 or Shelly Wall Frame 2 (sold separately).

The wall switch is fully customisable and can trigger anything from individual appliances to coordinated smart scenes and schedules involving multiple Shelly devices, or trigger anything and everything using software such as Home Assistant.

Please note that these work best with embedded steel knockout back boxes such as this example from ScrewFix. The ‘lip’ on drywall/plasterboard back boxes, depending on the brand/model, may show behind the Shelly Wall Frame (not included).

Available in black or white – select the required colour before adding to cart.

Shelly Device Compatibility

The Wall Switch 4 comes with three attachable holders to accommodate different devices from the Shelly range (sold separately):

• Holder 1 – for Shelly 2.5
• Holder 2 – compatible with all devices from the Shelly Plus/1 Gen3/2 Gen3 series
• Holder 3 – compatible with Shelly 1L / Shelly Dimmer 2
  • Not compatible with Shelly Wall Switch 1L Gen3

Note: You may require a neutral wire depending on the Shelly relay device you intend to use with this product. Some homes have neutral wiring at the switch, others only at the device (for example, a ceiling light). Please research the device and your home wiring (safely, see below) before purchasing.

⚠️Caution – Read Before Buying⚠️

• Before beginning the installation, please read this guide and any other documents accompanying the device carefully and completely
• Danger of electrocution. The mounting/installation of the device should be performed by a qualified person (electrician)
• Failure to follow the installation procedures could lead to malfunction, danger to your health and life, violation of the law or refusal of legal and/or commercial guarantee (if any)
• Allterco Robotics (makers of Shelly products) and Mann Enterprises LTD are not responsible for any loss or damage in case of incorrect installation or improper operation of this device due to failure to follow the user and safety instructions in the printed guide accompanying this product (also available in the resources section below)
• Shelly Wall Switches should be used in combination with Shelly devices or other smart devices designed to work with similar switches (the potential between Power and Switch input of the controlled devices should not exceed 12V (it’s 3.3V for Shelly devices)
• The Shelly Wall switch cannot be used to switch the main power through any kind of load
• Do not connect the device to appliances exceeding the given max load.
• Use the device only with a power grid and appliances which comply with all applicable regulations. Short circuit in the power grid or any appliance connected to the device may damage the device.
• Before starting, wire check that the breakers are turned off and there is no voltage on their terminals. This can be done with a phase meter or multimeter. When you are sure that there is no voltage, you can start wiring the cables.

Features

• 4-button Wall Switch
  • 4-way On/Off
• When combined with a compatible Shelly relay device:
  • Scene activation
  • 4-way On/Off
  • 2 Dimmers or 2 Roller Shutters
  • LAN connectivity
  • Flexible input control
  • Two-directional roller control
  • Dimming functionality
  • Smart schedules
  • Smart scenes
  • Multi-click action trigger
• Compatible with:
  • Shelly Plus i4
  • Shelly Plus series devices

Specifications

Resources

• Shelly Product Documentation
• Printed User Guide (as found within the package)
• Declaration of Conformity
• EAN:
  • White: 3800235266212
  • Black: 3800235266205

Handy Shelly Resources

• Shelly Cloud
• Shelly App
  • Apple App Store
  • Google Play
  • Huawei AppGallery
• Home Assistant Shelly Integration
• Shelly Community Forum
• Shelly Facebook Support Group
• Shelly Knowledgebase
• Shelly Device Finder (easy-to-use software to find Shelly devices in the local network)
• Shelly Developer API

Package Contents

• 1x Shelly Wall Switch 4 (select colour before adding to cart)
• 1 x Plastic Mount for Shelly Plus series devices
• 2 x Metal Screws
• 1 x Installation Guide

Shelly wall frames and ‘Plus’ relays are not included (available in the store)