Raspberry Pi Compute Module 5 (CM5) is a system-on-module that delivers the power of Raspberry Pi 5 in a form factor ideal for embedded applications.
Featuring a quad-core Arm Cortex-A76 processor, dual 4Kp60 HDMI output, Gigabit Ethernet, optional fully-certified wireless module providing Wi-Fi® and Bluetooth connectivity, and a variety of RAM and eMMC flash options, Compute Module 5 enables you to leverage Raspberry Pi 5’s powerful hardware and optimised software stack in your own custom systems and form factors.
In comparison with its predecessor (CM4), Compute Module 5 features additional I/O interfaces, allowing even more flexibility and providing a greater breadth of options for product and application design. For cost-sensitive applications, Compute Module 5 is also available without eMMC flash (‘Lite’ variants).
CM5 uses the same form factor as CM4, featuring two 100-pin high density connectors.
Development Kit Available!
Also available to assist product designers is the Raspberry Pi Development Kit for Compute Module 5, offering an ideal environment for prototyping embedded solutions.
Compute Module 5 Accessories
A number of optional accessories have been produced by Raspberry Pi to accompany the CM5, ensuring you have everything you need to develop your design:
- Raspberry Pi Compute Module 5 IO Board
- Raspberry Pi Compute Module 5 IO Case
- Raspberry Pi Compute Module 5 Passive Cooler
- Raspberry Pi Compute Module 4/5 Antenna Kit
A number of aftermarket accessories are also available in our dedicated Compute Module section.
Features & Specifications
| Form factor | 55 mm × 40 mm × 4.7 mm module |
| 4x M2.5 mounting holes | |
| Processor | Broadcom BCM2712 quad-core 64-bit Arm Cortex-A76 (Armv8) SoC @ 2.4GHz |
| Memory | Options for 2GB, 4GB, 8GB, 16GB LPDDR4-4267 SDRAM with ECC |
| Options for 0GB (Lite), 16GB, 32GB or 64GB eMMC flash memory | |
| See table below for a full list of variant options | |
| Connectivity | Options for certified radio module containing: – 2.4 GHz / 5.0 GHz IEEE 802.11 b/g/n/ac wireless – Bluetooth 5.0, BLE – On-board electronic switch to select between PCB trace or external antenna |
| Gigabit Ethernet PHY supporting IEEE 15881 | |
| 1 × PCIe x1 root complex, Gen 2 (5Gbps) | |
| 1 × USB 2.0 port (high speed) | |
| 2 × USB 3.0 ports, supporting simultaneous 5Gbps operation | |
| Up to 30 × GPIO supporting either 1.8V or 3.3V signalling and peripheral options: – Up to 5 × UART – Up to 5 × I2C – Up to 5 × SPI – 1 × SDIO interface – 1 × DPI (parallel RGB display) – 1 × I2S – Up to 4 × PWM channels – Up to 3 × GPCLK outputs |
|
| Video | 2 × HDMI 2.0 ports (supports up to 4Kp60 on both ports simultaneously) |
| 2 × 4-lane MIPI ports supporting both DSI (display port) and CSI-2 (camera port) | |
| Multimedia | 4Kp60 HEVC decoder |
| OpenGL ES 3.1 graphics, Vulkan 1.2 | |
| 1 × SDIO 2.0 (CM5 Lite) | |
| Input power | Single +5V PSU input supports USB PD for up to 5A @ 5V |
| Operating temperature | -20°C to +85°C |
| MTBF Ground Benign | 143 000 hours (168 000 hours CM5 Lite) |
| Production lifetime | Raspberry Pi Compute Module 5 will remain in production until at least January 2036 |
| Compliance | For a full list of local and regional product approvals, please visit pip.raspberrypi.com |
Variants Available
A total of 32 variants of the Compute Module 5 are available, each with a different configuration of onboard eMMC, RAM and wireless capability.
The table below shows all variant and their product codes. Select the configuration you require before adding to your cart.
| SKU | Part Number | Wireless | RAM | eMMC |
| SC1556 | CM5002000 | No | 2GB | OGB (Lite) |
| SC1558 | CM5002016 | 16GB | ||
| SC1559 | CM5002032 | 32GB | ||
| SC1560 | CM5002064 | 64GB | ||
| SC1562 | CM5004000 | 4GB | OGB (Lite) | |
| SC1564 | CM5004016 | 16GB | ||
| SC1565 | CM5004032 | 32GB | ||
| SC1566 | CM5004064 | 64GB | ||
| SC1568 | CM5008000 | 8GB | 0GB (Lite) | |
| SC1570 | CM5008016 | 16GB | ||
| SC1571 | CM5008032 | 32GB | ||
| SC1572 | CM5008064 | 64GB | ||
| SC1574 | CM5016000 | 16GB | OGB (Lite) | |
| SC1576 | CM5016016 | 16GB | ||
| SC1577 | CM5016032 | 32GB | ||
| SC1578 | CM5016064 | 64GB | ||
| SC1586 | CM5102000 | Yes | 2GB | 0GB (Lite) |
| SC1588 | CM5102016 | 16GB | ||
| SC1589 | CM5102032 | 32GB | ||
| SC1590 | CM5102064 | 64GB | ||
| SC1592 | CM5104000 | 4GB | OGB (Lite) | |
| SC1594 | CM5104016 | 16GB | ||
| SC1595 | CM5104032 | 32GB | ||
| SC1596 | CM5104064 | 64GB | ||
| SC1598 | CM5108000 | 8GB | 0GB (Lite) | |
| SC1600 | CM5108016 | 16GB | ||
| SC1601 | CM5108032 | 32GB | ||
| SC1602 | CM5108064 | 64GB | ||
| SC1604 | CM5116000 | 16GB | OGB (Lite) | |
| SC1606 | CM5116016 | 16GB | ||
| SC1607 | CM5116032 | 32GB | ||
| SC1608 | CM5116064 | 64GB |
Resources
- Raspberry Pi Compute Module 5 announcement
- Raspberry Pi Compute Module 5 Product Brief
- Raspberry Pi Compute Module 5 Datasheet
- Raspberry Pi Compute Module 5 Design Files
- Raspberry Pi Compute Module 5 Documentation
Package Contents
- 1x Compute Module 5 board (select required configuration before adding to cart)
| Storage | Lite, 16GB, 32GB, 64GB |
|---|---|
| RAM | 2GB, 4GB, 8GB, 16GB |
| Wireless | Wireless, No Wireless |
Be the first to review “Raspberry Pi Compute Module 5”
Related products
Electronics Accessories
HG 1/144 BLACK KNIGHT SQUAD Rud-ro.A(GRIFFIN ARBALEST CUSTOM)
Electronics Accessories
Electronics Accessories
Electronics Accessories
Electronics Accessories
Kanto SX26 26 Fillable Speaker Stands with Isolation Feet – Pair (Black)
Electronics Accessories
Electronics Accessories
Electronics Accessories
Reviews
There are no reviews yet.