PD Power Extension Board for Raspberry Pi 5

The PD Power Expansion board from 52Pi is a multi-feature power management solution for Raspberry Pi 5.

The board offers a range of power input options, such as USB-C PD, 1.7mm DC 9-24V and even a set of VIN pads. Output power enjoys similar flexibility, including USB-C out (5V 5A), ATX 4-pin, and 5V output pads.

There’s also an always-ON switch which allows you to select to start the device automatically when power is connected, without the need to press the power button.

Finally, the onboard power button can be used for manual power control. A short-press turns power on, a long-press cuts it off.

We recommend using the Raspberry Pi 27W USB-C power supply when powering via USB-C. You may also want to pick up a DC adapter cable, as the compact 1.7mm jack on this board isn’t as common as the usual 2.1mm barrel jacks you see everywhere.

Warning: Do not connect multiple input power options at the same time.

Raspberry Pi 5 not included.

Features

• Power Input Options:
  • USB PD: Default 15V input for Power Delivery
  • 1.7mm DC Interface: 9-24V input through a dedicated DC interface (you may want to grab an adapter)
• Power Output Options:
  • USB-C Output: Delivers 5V/5A MAX via a USB-C port
  • USB PD 3.0 Interface: Provides 5.15V@5A output through Power Delivery 3.0
  • 5V VBUS Output: Alternate output option for 5V power supply
• Always-ON Switch:
  • Default State: Disabled.
  • Functionality: Requires manual activation by pressing the Power ON button during each startup
• Automatic Startup: Supports automatic startup of the Raspberry Pi upon power restoration
• Manual Power Control: Long-press the Power ON switch for shutdown
• Versatile Power Management: Flexibility power input sources and output options
• Compact and Compatible: Designed for Raspberry Pi 5
• User-Friendly Operation: Intuitive push-button controls for both manual and automatic power management

Resources

• Product Wiki
• Product number: 52Pi EP-0225

Package Contents

• 1 x PD Power Board for Raspberry Pi 5
• 8 x M2.5x4mm Black flat head screws
• 4 x M2.5x18mm Copper pillars
• 1 x USB-C to USB-C Power cable

Raspberry Pi 5 not included.