Aluminium VESA Raspberry Pi 5 Case

Keep your Raspberry Pi 5 protected, cool and out of sight with this aluminium Raspberry Pi 5 VESA case.

These cases feature upper and lower ventilation alongside the natural heat-dissipating qualities of the aluminium body. Combine with a heatsink or other cooling solution for even greater cooling performance!

75mm VESA mounting plates are included in the pack to mount your Raspberry Pi on the back of a monitor or display, however, the case can be used without these add-on plates if preferred (Note: The VESA plates are designed to be used on one side only i.e. 2 screws attached to your monitor at 75mm apart, however two plates are included)

All of the side Raspberry Pi ports are accessible (HDMI/SD/Power/USB), with power button access provided by the included soft button gasket. A GPIO ribbon cable pass-through cut-out has been added allowing you to access the Raspberry Pi’s GPIO pins whilst the case is closed.

A mini screwdriver and case fixings are included in the pack.

Note: Raspberry Pi is not included. VESA mounting bolts for your monitor are not included. Simple assembly is required.

Features

• Compatible with the Raspberry Pi 5 only
• All-aluminium construction
• Upper and lower ventilation holes
• VESA mounting wings included for 75mm VESA mounting (two holes/one plate only)
• All Raspberry Pi ports side are accessible (no dedicated cut-outs for CSI/DSI/UART/RTC/PCI-E)
• Power button access via soft gasket (includes indicator light)
• SD card access
• GPIO ribbon cable pass-through section
• Simple assembly required (mini screwdriver included!)

Package Contents

• 1x Aluminium Case Body (2 parts)
• 2x VESA wings
• 1x Mini Screwdriver
• 1x Fixing pack