Pogo Pin Probe Clip – 6 Pins with 2.54mm/0.1 Pitch

The Pogo Pin Probe Clip with 6 pins in a 2.54 / 0.1′ pitch spacing is a great way to test and connect with pin-point accuracy without soldering! It’s sort of like an alligator clip with an array of built-in springy pogo pins – so you can connect to a PCB with classic 0.1′ spaced pad holes, without soldering or a special adapter cable.

The clip is constructed from PCB sections, with a sandwich to support the thin pogo pins. The pogos are then extended up into a 1×6 0.1′ header for everyday socket header cables to plug into. You can use these cables to extend out to your programmer or adapter.

Specifications

• Max depth between pogo pins and edge of PCB: 25mm