![Black Mecanum Wheel with Motor Shaft Coupling (60mm) – Right [Discontinued]](https://cdn.shopify.com/s/files/1/0176/3274/products/black-mecanum-wheel-with-motor-shaft-coupling-60mm-right-dfrobot-fit0766-29032677671107.jpg?v=1646630467)
This Raspberry Pi e-ink display module comes with a 2.13′ screen with a resolution of 250×122, adopting the SPI interface to communicate with Raspberry Pi.
It leads out the GPIO pins on the Raspberry Pi so there are no conflicts if you need to use the e-ink display and Raspberry Pi’s pins at the same time. It also supports custom fonts (ttf)!
Unlike other e-ink displays, this board includes two switches on the front for expanding your project with inputs. This e-ink display has a compact layout and low power consumption. It can provide a clear display even in sunlight.
When powered off, the e-ink display will continue to display the last screen. Since it will take a long time for the display to refresh fully, we don’t recommend using the product in the application that needs frequent refreshing to display data.
Specification
- Operating Voltage: 3.3V
- Resolution: 250 x 122
- Interface Type: SPI
- Colour: black, white
- Refresh Way: fully or partially refresh
- Refresh Time: 3s for a full refresh, 680ms for a partial refresh
- Refresh Power: 26.4mW（typ.）
- Standby Power: 0.017mW
- Visual Angle: >170°
- Connector: 2.54mm 2*20pin
- Dimension: 66.5 x 31 mm/2.62×1.22”
- Storage Temp: -20℃~+60℃
Documents
- Product wiki
Shipping List
- 1x Raspberry Pi e-ink Display Module
- 2x Double Nuts Copper
- 4x Screw
Be the first to review “2.13 E-ink Display Module for Raspberry Pi”
Related products
Electronics Accessories
Electronics Accessories
Electronics Accessories
Electronics Accessories
MAONO CASTER AME2 Audio Interface mixer and Podcast Equipment
Electronics Accessories
Electronics Accessories
Electronics Accessories
Electronics Accessories
Reviews
There are no reviews yet.