Aeotec Z-Wave Water Sensor 7 Pro

The Aeotec Water Sensor 7 Pro is a Z-Wave flood/leak sensor with a sensor probe and built-in temperature and humidity sensor.

Battery-powered with a battery life of up to 5 years, this Z-Wave water sensor includes a probe for monitoring difficult-to-access areas.

Once connected to your Z-Wave-enabled home automation system, this sensor can help you take protective measures to help limit the amount of damage caused by drips, leaks, bursts or other water flows. For example in the event of a pipe burst, use the trigger from this sensor to instruct other devices to take action, such as smart water valves, including those installed on the mains pipe, to automatically close – or just send yourself a notification to deal with the problem as soon as possible!

Monitoring more than just the presence of liquid, the Aeotec Water Sensor 7 Pro lives up to its name by also being able to monitor the absence of water. When used to monitor tanks or pits, the Aeotec Water Sensor 7 Pro can alert you when water levels get too low and trigger automation routines.

The Aeotec Water Sensor 7 Pro also monitors your room’s temperature and humidity, allowing you to use this data to control and manage connected heating or cooling systems. With real-time humidity monitoring, the smart device can be used to automatically manage a room’s air quality, activating extractor fans and humidifiers or dehumidifiers.

Compatible with a range of home automation systems, including Home Assistant once paired with a Z-Wave hub such as the Aeotec Z-Pi-7. The sensor features Z-Wave Plus V2, S2 wireless security and SmartStart installation.

You will need a Z-Wave hub/existing Z-Wave network to use this device.

---

Lithium Battery Shipping: Due to courier restrictions, this product can only be shipped within the United Kingdom. With this item in your cart your shipping options will be limited and may cost more than our usual rates. Why?

---

Features

• Built with Z-Wave 700 series – higher range, more efficient and better performance compared to older generation series
• Z-Wave Water Sensor
• Sensor probe for the detection of leaks in difficult-to-access areas
• Monitors temperature between -10°C and 65°C with a variance of ±1°C
• Monitors relative humidity between 0% and 80% with a variance of ±3%
• Wireless technology: Z-Wave Plus V2
• SmartStart enabled
• S2 Security
• Battery powered (1x CR14250) – battery included
• Up to 5 years battery life

Specifications

Dimensions	28x95x35 mm
Hardware Platform	ZGM130S
EAN	1220000016729
IP Class	IP 20
Battery Type	1x CR14250 3V (lithium)
Device Type	Notification Sensor
Generic Device Class	Sensor Notification
Specific Device Class	Routing Sensor Notification
Network Operation	Reporting Sleeping Slave
Firmware Version	02.00
Z-Wave Version	07.12
Certification ID	ZC12-20060075
Z-Wave Product Id	0371.0002.0013
Frequency	Europe – 868.4 Mhz
Maximum transmission power	5 mW

Resources

• User manual

Package Contents

• 1x Aeotec Z-Wave Water Sensor 7 Pro
  • Includes CR14250 3V lithium battery pre-installed
• Screw Pack
• Double-sided tape