ESP32-S3 Development Board with 1.69 IPS LCD Touch Display (240 x 280)

This ESP32-S3 1.69′ LCD has a display with a 240 x 280 resolution and 262K colour for sharp and vibrant visuals. It is equipped with an ESP32-S3R8 Xtensa® 32-bit LX7 dual-core processor, running at up to 240MHz main frequency. The board supports 2.4GHz Wi-Fi (802.11 b/g/n) and Bluetooth® 5 (LE) with an onboard antenna for seamless connectivity.

We are now stocking the updated version (as of 23/04/2025), which has a change to the pinout. Please see the Wiki for more information.

It includes 512KB of SRAM and 384KB of ROM, alongside 8MB of onboard PSRAM and an additional 16MB of external Flash memory. The USB-C connector provides an easy connection, and there is a built-in ST7789V2 display driver and CST816T capacitive touch chip, which utilise SPI and I2C communication, respectively, to conserve IO resources. Additionally, the board has a QMI8658 6-axis IMU, which includes a 3-axis accelerometer and 3-axis gyroscope, capable of detecting motion gestures and counting steps. It also comes with an onboard 3.7V MX1.25 lithium battery recharge/discharge header, making it a great choice for your next project!

Please note: this board uses a tiny MX1.25 connector for LiPo power. Most LiPo batteries on the market (including ours) use a larger JST fitting. We do not yet stock batteries with an MX1.25 connector, however, you can customise your battery with one of our 1.25mm pitch cables to make a compatible battery yourself (assuming you have the ability, knowledge and tools to do this safely).

Features

• Equipped with ESP32-S3R8 Xtensa® 32-bit LX7 dual-core processor, up to 240MHz main frequency
• Supports 2.4GHz Wi-Fi (802.11 b/g/n) and Bluetooth® 5 (LE), with onboard antenna
• Built-in 512KB of SRAM and 384KB ROM, with onboard 8MB PSRAM and an external 16MB Flash memory
• USB-C connector, keeps it up to date
• Onboard 1.69 240 x 280 pixels 262K capacitive touch display for clear colour pictures
• Built-in ST7789V2 display driver and CST816T capacitive touch chip, using SPI and I2C communication respectively, effectively saving the IO resources
• QMI8658 6-axis IMU (3-axis accelerometer and 3-axis gyroscope) for detecting motion gestures, counting steps, etc.
• PCF85063 RTC chip with reserved SH1.0 RTC battery header (supports charging) for RTC function requirement
• RST, BOOT and a programmable PWM button for easy custom function development
• 3.7V MX1.25 lithium battery recharge/discharge header
• Reserved pads of 4 x GPIO, I2C, and UART interface, for connecting peripherals and debugging
• Supports flexible clock, module power supply independent setting, and other controls to realise low power consumption in different scenarios
• High touch screen transmittance, fast response and long lifetime

What’s on Board

1. ESP32-S3R8
   The SoC with WiFi and Bluetooth, up to 240MHz operating frequency, with onboard 8MB PSRAM
2. W25Q128JVSIQ
   16MB NOR-Flash
3. PCF85063
   RTC chip
4. QMI8658
   6-axis IMU includes a 3-axis gyroscope and a 3-axis accelerometer
5. ETA6098
   High-efficiency Lithium battery recharge manager
6. MX1.25 battery header
   MX1.25 2P connector, for 3.7V Lithium battery, supports charging and discharging
7. USB Type-C connector
   For programming and log printing
8. Buzzer
   Sound-producing peripheral
9. RTC battery header
   For connecting rechargeable RTC battery, supports charging and discharging
10. Onboard antenna
    Supports 2.4 GHz Wi-Fi (802.11 b/g/n) and Bluetooth® 5 (LE)
11. PWM button
    Supports battery power supply control, single-press, double-press, multi-press and long-press operations
12. BOOT button
13. RST Reset button

Resources

• Product Wiki

Package Contents

• 1x ESP32-S3 1.69′ Touch Display Development Board (updated version)

Revision History

• As of 23/04/2025 – we are now stocking the updated version which uses a different pinout. Please see the Wiki for more information.