ESP32-S3 Development Board with 4 Capacitive Touch LCD Display (480 x 480)

This ESP32-S3 development board has 2.4GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5 (LE), making it ideal for smart control panels, home gateways, and industrial control systems. A 16MB Flash and 8MB PSRAM provide ample memory to work with different projects.

The board has a 4′ capacitive touch display with a 480 x 480 resolution, 160° wide viewing angle and 65K colours providing smooth and vibrant graphics from most points of viewing, capable of running sophisticated GUI programs like LVGL. The 5-point touch interface, controlled via I2C, has advanced touch interactions, making it very responsive for easy control.

Powered by the Xtensa 32-bit LX7 dual-core processor with a clock speed of up to 240MHz, this board can handle big tasks efficiently. Additionally, it comes with multiple peripheral interfaces, including CAN, RS485, I2C, and an SD card slot, along with a full-speed USB port, making it a versatile option for various projects.

Features

• Equipped with Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency
• Supports 2.4GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5 (LE), with onboard antenna
• 512KB SRAM and 384KB ROM, with onboard 16MB Flash and 8MB PSRAM
• 4′ capacitive touch display, 480 x 480 resolution, 65K color
• Capacitive touch control via I2C interface, 5-point touch with interrupt support
• CAN, RS485, I2C interface and TF card slot, and integrates a full-speed USB port
• Flexible clock, module power supply independent setting and other controls to realize low power consumption in different scenarios

What’s on Board

1. ESP32-S3N16R8
   The SoC with WiFi and Bluetooth, up to 240MHz operating frequency, integrated 8MB PSRAM and 16MB Flash
2. SW6106
   Battery charging/discharging management chip
3. TJA1051T/3/1J
   CAN transceiver
4. SP3485
   RS485 transceiver
5. PCF85063
   RTC chip
6. TCA9554PWR
   IO expansion chip
7. XL1509-ADJE1 Power Chip
   Supports 7~36V DC power input
8. 3.5mm 10pin Screw Terminal Slot
   For installing a 3.5mm 10pin screw terminal block
9. RTC Battery Header
   For connecting rechargeable RTC battery (only supports rechargeable RTC battery)
10. USB Type-C Port
    ESP32-S3 USB interface, for power supply, burning programs and printing logs
11. SD Card Slot
12. PH2.0 Lithium Battery Header
    PH2.0 2P connector, for 3.7V Lithium battery, supports charging and discharging
13. Buzzer
    sound-producing peripheral
14. RS485 and CAN terminal resistor selection
    Close by default
15. Power supply indicator
16. BOOT button
17. RESET button
18. BAT_PWR button
    Power ON/OFF button when using the battery for the power supply

Resources

• Product Wiki
• Schematic

Package Contents

• 1x ESP32-S3 4′ Touch Display Development Board
• 1x Back wiring 3.5mm pitch 10P pluggable terminal block
• 1x Bottom wiring 3.5mm pitch 10P pluggable terminal block