LiFePo4 Lexton lithium-iron-phosphate battery, with BMS, 12.8V, 200Ah, LXLFP200

LiFePO4 (lithium-iron-phosphate) batteries with integrated BMS are mainly characterized by very low weight and a high number of duty cycles – a life of about 6000 cycles at DoD 60%. Thanks to its high cyclic rate and very low self-discharge, the LiFePO4 battery is ideal, both in emergency power systems and in operation in OFF-GRID installations.
Low weight allows the device to be used in vehicles such as campers, foodtrucks and boats, among others. The built-in BMS ensures that the battery is stored without losing its nominal capacity for a long time, and controls the charging and discharging processes of the battery.

What devices are powered by the LiFePO4 battery:
– emergency power systems
– OFF-GRID installations
Installations in vehicles (campers, foodtrucks)
Electrical installations in boats to power electronic devices, lighting, household appliances (ONLY when using an airtight housing for the battery)
The battery is equipped with a built-in Bluetooth module, which allows you to connect to your phone. Thanks to the app, you can check the battery’s parameters, including charge status, capacity to use, current charge/discharge current, current voltage, discharge capacity.

– Battery type: LifePO4
– Battery model: 12.8V 200Ah
– Energy amount: 1280Wh
– Normal capacity (25°C, 0.2°C): 200Ah
– Voltage range (Vdc): 11.2~14.6V
– Max. continuous discharge current: 200A
– Max continuous charging current: 100A
– Weight: 20.6kg
– Safety standard: UN38.3, MSDS
– Dimensions (W x H x D): 495 x 220 x 245 mm.

– LiFePo4 Lexton LXLFP200 lithium-iron-phosphate battery

NOTE:
When using the LIFEPO4 battery to power a device with an electric motor, including propeller motors, it is mandatory to use a DC fuse on the (+) circuit of the battery, with a value not greater than the maximum load current indicated on the housing.
The load of the battery with a starting current that can be from 5 to 10 times higher than the nominal operating current of electric motors, outboards, built-in motors, compressors, refrigerators, air conditioners and other motor equipment can cause permanent damage to the LIFEPO4 battery with BMS.
For starting outboard motors with an electric starter, it is recommended to use AGM batteries. This is because in LiFePO4 batteries the maximum current is limited by the BMS to 100 or 150A, and this is not enough for electric starters.
Maximum charging voltage is 14.6V. After a long stop (such as after winter), do not charge with high current. The manufacturer recommends charging with a maximum current of 10A. Check what maximum charging voltage your charger offers so that it does not exceed 14.6V, as this risks damaging the battery. These types of batteries can be fully charged at 14V already, but the process will be slower.

– LiFePO4 type battery with built-in BMS
– Great for both emergency power systems and OFF-GRID operation
– Low weight allows to use the device in installations in vehicles (campers, foodtrucks) and boats
– Built-in BMS ensures battery storage without loss of nominal capacity for a long time
– Bluetooth module allows you to connect to your phone. Thanks to the app, you can check the battery parameters including state of charge, capacity to use, current charge/discharge current, current voltage, discharge capacity
– Overvoltage and overload protection
– Capacity: 200Ah