Monochrome 1.3 128×64 SH1106G SPI OLED Monochrome Display

This is a screen for advanced hackers who like the look of the OLED screen we’ve put into the Adafruit MACROPAD RP2040. 

This is just the raw display module – no PCB or supporting circuitry is included! You’ll need to add a 12V boost converter and other components to make it work. Check out the MACROPAD PCB files for a place to start.

We’re selling this module bare for those who want to integrate it into their own project or repair a broken MACROPAD. If you just want to quickly add a monochrome 128×64 OLED to your project, we suggest our breakout board or Raspberry Pi Bonnet featuring a very-similar-OLED with SSD1306 chipsets. Both makes it easy to use SPI interfacing and also has mounting holes, level shifting, etc.

For software interfacing, you’ll need an SH1106G driver, we’ve written both Arduino and CircuitPython drivers you can use.

For the matching connector, you’ll need a 16-pin 0.5mm pitch FPC flip-lock connector.

Technical Details