MOTION 2350 Pro – Advanced Robotics Controller for Beginners

The Motion 2350 Pro is an advanced robotics controller designed for beginners and intermediate users, packed with features and built around the Raspberry Pi RP2350 processor.

It has a strong DC motor driver capable of controlling up to four brushed DC motors, multiple servo and GPIO ports, and a USB host for plug-and-play with joysticks.

The board is preloaded with CircuitPython, offering a ready-to-use experience, and supports programming in Python, C/C++, and Arduino (soon). It’s great for building complex robots with minimal electronic setup.

Features

• Supports a wide range of DC motors
• USB Type-C Connector (5V)
• On/Off Switch
• 8x Servo Motor
• Colour-coded servo ports
• 4-channel DC motor driver
• Status LEDs
• USB Host
• Control robot with wireless joystick
• 3x Maker Ports (compatible with Qwiic and Stemma QT)

What’s on Board

Specifications

• Powered by Raspberry Pi RP2350
  • Dual-core Arm Cortex-M33 processor
  • 520KB internal RAM
  • 150MHz Frequency Clock
  • 2MByte Flash
• Robot Controller Board
  • 4 x DC Motor Driver (with quick test buttons)
  • 8 x Servo Motor
  • 8 x 3V GPIO Breakout
• Input Power
  • VIN Terminal: 3.6V – 16V
  • USB Type-C: 5V
• Maximum DC Motor Current, each channel
  • Continuous: 3A
  • Peak: 5A
• 24 x Status indicator LEDs
  • 8 x for Servo Port
  • 8 x for 3V GPIO Breakout
  • 8 x for DC Motor Driver
• 12 x Push Button
  • 8 x Quick Test Button for DC Motor 
  • 2 x User Button
  • 1 x BOOT Button
  • 1 x RST Button, for reset
• 3 x Maker Port
• 2 x RGB LED (Neopixel Compatible)
• 1 x USB Host
• 1 x Piezo Buzzer (with mute switch)
• 1 x On/Off Switch (with MOSFET Shock-Proof Circuit)
• Preloaded with CircuitPython by default
• Programming Language
  • CircuitPython
  • MicroPython
  • C/C++
  • Arduino (coming soon)
• Board Dimension: 95.2 x 57.2 x 8 (height) mm

Raspberry Pi Chip Comparison (Old vs New)

Resources

• MOTION 2350 Pro Datasheet
• MOTION 2350 Pro 3D CAD
• RP2350 Datasheet (pdf), by Raspberry Pi
• Getting Started with MOTION 2350 Pro, tutorial by Cytron Technologies
• CircuitPython mainpage
• MicroPython main page
• SDK C/C++, from Raspberry Pi

Pinout

Package Contents

• 1 x MOTION 2350 Pro
• 1 x STEMMA QT / Qwiic JST SH 4-pin Cable with Female Sockets (150mm)
• 2 x Grove to JST-SH Cable (200mm)
• 1 x Set of Silicone Bumper
• 4 x Building Block Friction Pin
• 1 x Mini Screwdriver