The Olimex ESP32-C6-EVB is a WiFi 6 (IEEE 802.11ax) and Bluetooth-enabled development board using the Espressif ESP32-C6, which integrates 2.4 GHz, Wi-Fi 6, Bluetooth 5 (LE) and the 802.15.4 low-rate wireless personal area network (LR-WPAN).
The board includes four 10A/240VAC relays, four opto-isolated inputs for DC voltage (up to 30VDC) and a USB-C connector for power/programming. It also offers a wide power input range via the barrel jack connector, accepting 8-50V input.
This board is perfect for stand-alone usage but can also be attached to any existing hardware project to augment it with 2.4GHz Wi-Fi 6 and Bluetooth LE 5.3 capabilities.
Please note: the relays may change between batches (colour/brand) however they are rated the same. The LEG-5F relays on recent batches may only show 120 VAC 15A, however this is just because the small relay surface does not allow all ratings to be shown.

Features
- ESP32-C6-WROOM-1-N4 module
- 32-bit RISC-V single-core microprocessor
- Up to 160 MHz
- Flash: 4MB
- ROM: 320 KB
- HP SRAM: 512 KB
- LP SRAM: 16 KB
- USB-C connector for powering, programming and JTAG debugging
- Power jack for optional external power 8-50V DC
- Four Relays: 10A/240VAC
- Four optoisolated inputs for DC voltage up to 30VDC
- Two UEXT connectors (0.1′ step one and JST one)
- Extension GPIO connector
- Reset button
- User button
- Wide range of power supply: 8-50VDC
- Programming connector suitable for ESP-PROG
- Four mount holes
- Four rubber pads are included
Resources
- User manual
- Schematic
- KiCAD source files
- Demo project, refer to the instructions
- CE Declaration of Conformity
- UKCA Declaration of Conformity
Package Contents
- 1x ESP32-C6-EVB board


![RP2040 Zero Development Board [Discontinued]](https://cdn.shopify.com/s/files/1/0176/3274/files/rp2040-zero-development-board-the-pi-hut-wav-25506-42087367475395.jpg?v=1714382399)
Reviews
There are no reviews yet.