The SupTronics X1009 5-Port SATA Add-on for Raspberry Pi 5 connects up to five SATA drives via PCIe at 5Gbps. Powered through a 12V DC jack with onboard converters, it powers both the Pi and drives from one source.
The SupTronics X1009 5-Port SATA Add-on is designed to offer a high-capacity and high-speed storage solution for your Raspberry Pi 5. This board supports the simultaneous connection of 5 large-capacity SATA storage devices, with the SATA 3.0 interface reaching speeds of up to 5Gbps via PCIe.
The X1009 features a 12V input via a standard DC jack (power supply not included) and is equipped with high-efficiency DC/DC step-down converters to power both your Raspberry Pi 5 and PCIe devices concurrently, simplifying the power supply to a single source. Do not power your Pi 5 via USB-C at the same time as the barrel jack!
Ideal for creating a home media centre or setting up a network-attached storage (NAS) system.
Please read the specifications – you’re going to need a beefy 12V PSU to power five drives at once (up to 11A!).
HDDs, Raspberry Pi, Active Cooler and power supply not included.
Features
- Compatible with Raspberry Pi 5B
- Supports the connection of five SATA 3.0 devices to your Raspberry Pi 5 simultaneously
- Compliant with the Serial ATA 3.0 specification, with backward compatibility to SATA 2.0 and SATA 1.0
- Adheres to the PCI-Express v2.0 specification and is backward compatible with PCI-Express v1.0
- Supports communication speeds of 5.0 Gbit/s, 3.0 Gbit/s, and 1.5 Gbit/s
- Compatible with SATA 6G, 3G, and 1.5G hard drives
- Blue LED indicators display power and drive status
- High-efficiency DC/DC step-down converter to power both your Raspberry Pi 5 and SATA devices simultaneously
- Efficient power delivery to the Raspberry Pi 5 via a pin header, consolidating power sources
- Compatible with the Raspberry Pi Active Cooler
- Supports the HAT+ STANDBY power state, automatically turning off SATA devices when the Pi 5 is powered down
- Includes a power SATA splitter cable for connecting up to 5 Serial ATA devices
The X1009 is designed for data storage purposes and does not currently support booting from HDD/SSD with the existing firmware.
Do not power the X1009 via the DC power jack and the Raspberry Pi 5 via USB-C at the same time.
Specifications
| Power supply | 12Vdc ±5% ≥3A for one 3.5′ HDD or one 2.5′ HDD |
| ≥5A for two 3.5′ HDDs, ≥7A for three, ≥9A for four, ≥11A for five 3.5′ HDDs | |
| ≥4A for two 2.5′ HDDs, ≥5A for three, ≥6A for four, ≥7A for five 2.5′ HDDs | |
| Your SATA drives can also be powered from a separate PSU. | |
| Ports & connectors | DC power jack ×1 – 5.5×2.1mm |
| PCIe connector ×1 – 16-pin pitch 0.5mm | |
| SATA connectors ×5 – 7P | |
| PCIe cable length | 37mm |
| PCB size | 85mm × 57.2mm |
Resources
- Software setup/tutorials
- Hardware information and assembly
Package Contents
- 1x SupTronics X1009 5-Port SATA Add-on for Raspberry Pi 5
- 1x SATA power splitter cable
- 1x 30mm PCIe cable
- 1x Screw pack
Be the first to review “SupTronics X1009 5-Port SATA Add-on for Raspberry Pi 5”
Related products
Electronics Accessories
Kanto SX26W 26 Fillable Speaker Stands with Isolation Feet – Pair (White)
Electronics Accessories
Electronics Accessories
MAONO DM40 Pro USB/Wireless Gaming Desktop Microphone (White)
Electronics Accessories
MAONO CASTER AME2 Audio Interface mixer and Podcast Equipment
Electronics Accessories
Grandstream GHP610 Hotel Phone, 2 Line IP Phone, 2 SIP Accounts
Electronics Accessories
Electronics Accessories
Electronics Accessories
Reviews
There are no reviews yet.