WIZnet WizFi360-EVB-Pico

The WizFi360-EVB-Pico is based on the Raspberry Pi Pico/RP2040 and adds Wi-Fi connectivity using a WizFi360 module. It is pin-compatible with the Raspberry Pi Pico board and is ideal for IoT solution development.

The WizFi360 pinout is directly connected to the GPIO of RP2040 as shown in the pinout image further down the page. It has the same pinout as the Raspberry Pi Pico board however GPIO4, GPIO5, GPIO6, GPIO7, and GPIO20 are connected to the WizFi360 module. These pins enable UART communication with the WizFi360 to use the WiFi function. If you are using the Wi-Fi function, these pins cannot be used for any other purpose.

The RP2040 GPIO used by the WizFi360-EVB-Pico is as follows:

Apart from GPIO and ground pins, there are 7 other pins on the main 40-pin interface:

Features

• RP2040 microcontroller with 2MByte Flash
  • Dual-core cortex M0+ at up to 133MHz
  • 264kByte multi-bank high performance SRAM
  • External Quad-SPI Flash with eXecute In Place (XIP)
  • High-performance full-crossbar bus fabric
  • 30 multi-function General Purpose IO (4 can be used for ADC)
    • 1.8-3.3V IO Voltage (NOTE. Pico IO voltage is fixed at 3.3V)
  • 12-bit 500ksps Analogue to Digital Converter (ADC)
  • Various digital peripherals
    • 2 × UART, 2 × I2C, 2 × SPI, 16 × PWM channels
    • 1 × Timer with 4 alarms, 1 × Real Time Counter
  • 2 × Programmable IO (PIO) blocks, 8 state machines total
  • Flexible, user-programmable high-speed IO
  • Can emulate interfaces such as SD Card and VGA
• Includes WizFi360-PA
  • WiFi 2.4G, 802.11 b/g/n
  • Support Station / SoftAP / SoftAP+Station operation modes
  • Support “Data pass-through” and “AT command data transfer” mode
  • Support serial AT command configuration
  • Support TCP Server / TCP Client / UDP operating mode
  • Support configuration of operating channel 0 ~ 13
  • Support auto 20MHz / 40MHz bandwidth
  • Support WPA_PSK / WPA2_PSK encryption
  • Support built-in unique MAC address and user-configurable
  • Industrial grade (operating temperature range: -40 ° C ~ 85 ° C)
  • CE, FCC certification
• 16M-bit Flash Memory
• Micro-USB B port for power and data (and for reprogramming the Flash)
• 40 pin 21×51 ‘DIP’ style 1mm thick PCB with 0.1″ through-hole pins also with edge castellations
• 3-pin ARM Serial Wire Debug (SWD) port
• Built-in LDO
• Dimensions: 75mm x 21mm
• Operating Conditions
  • Operation Temperature MAX: 85C (including self-heating)
  • Operation Temperature MIN: -20C
  • VBUS: DC 5V (+/- 10%)
  • VSYS Min: DC 4.3V
  • VSYS Max: DC 5.5V

Resources

• Documentation
• Examples
  • Basic Example for RP2040
  • Arduino library and examples
  • C/C++ Examples
  • Azure IoT Example
  • AWS IoT Example
• WIZnet Forum
• RP2040 Datasheet
• WizFi360 Datasheet
• Schematic
• Schematic, Part list & Gerber Files

Pinout