Seeed XIAO MG24

This XIAO MG24 is a small development board that uses the Silicon Labs EFR32MG24 SoC and the ARM Cortex-M33 processor. There is 4MB of Flash and it’s ideal for battery-powered home automation products due to its low power consumption (less than 1.95μA in sleep mode). It supports Matter, Thread, Zigbee and Bluetooth LE 5.3.

There is an antenna attached to the board with a BLE range of up to 50m in an open location with no signal interference and there is also room for an external uFL antenna.

If you’re looking for the same dev board but with an analogue microphone and 6-axis IMU attached to it, click here to view it in our store.

The board comes with a set of loose headers for soldering to the board if required.

Features

• Silicon Labs’ EFR32MG24 SoC, 32-bit 78 MHz ARM Cortex®-M33 with DSP instruction
• Compatible with Matter® over Thread® and Bluetooth® Low Energy 5.3, Supported by the Arduino® Core
• Equipped with an on-board antenna with a BLE range of up to 50m in an open location with no signal interference, while reserving an interface for an external UFL antenna
• Power consumption less than 1.95μA in sleep mode, ideal for battery-powered home automation projects
• A dedicated hardware secure engine containing its own CPU enables the Secure Vault functions.
• Additional 4MB Flash on board, on-board battery charging circuit, 19 GPIOs, LED
• Remains the classic XIAO design of the thumb-size form factor of 21 x 17.8mm, and single-sided mount, making it perfect for space-limited projects such as wearables
• Natively compatible with all the XIAO accessory add-ons and kits of Grove Expansion, CAN-Bus, LED Matrix, Vision AI Sensor, Round Display, GSP Module, 2-Mic Array, ePaper Display, mmWave sensor, LoRa Module and many more.
• Product Number: Seeed 102010590

What’s on Board

Specifications

Resources

• Product Wiki
• Datasheet
• Schematic
• Wireless SoC

Package Contents

• 1x XIAO MG24
• 2x 7-pin Headers