Zooz Z-Wave Outdoor Motion Sensor – 800 Series

The Zooz ZSE70 Z-Wave Outdoor Motion Sensor is a 3-in-1 IP66-rated Z-Wave motion detector complete with lux and temperature sensors! You can depend on it for both security and home automation, inside or outside the home.

Please note this device uses the UE/UK 868.4MHz frequency and does not support LR (Long Range) Z-Wave functionality.

Mount it on a clean flat surface, add it to your Z-Wave hub, and program notifications for unexpected activity. Use these reports to automate lights, sirens and trigger other Z-Wave devices.

The sensor monitors brightness levels to help you fine-tune your smart lighting schedules. You’ll be able to customize its behaviour and performance as long as your hub grants you access to advanced settings. Please take a look at the compatibility list below before purchasing.

You’ll also get temperature reports to your hub to help you fine-tune your smart home schedules and automate heating, HVAC equipment and more.

While the sensor is rated for outdoor use, it can be just easily used inside of your home. It’s small enough to blend into any room and you can power it with the included 2x CR123A batteries or optional 12-24V terminal input (power supply not included) if you prefer a low-voltage power supply instead. Spare CR123A batteries are available here if you want to stock up!

Z-Wave 800 Series

Features the new 800 series Z-Wave chip. Get more range, longer battery life, and quicker reports with the latest technology. Enjoy an improved range that allows for more reliable communication, even from the far corners of your home. Includes the innovative S2 authenticated security and SmartStart, equipped with a unique QR code and pin for easier and safer pairing.

Z-Wave hub/stick required – this sensor runs the 868.42 MHz Z-Wave frequency, as used in the UK and Europe. Grab a Zooz Z-Wave stick here!

Z-Wave Compatibility

Check hub compatibility before buying (doesn’t work with alarm panels, not supported by Ring). Please contact the friendly team at Zooz for advice before buying if your hub isn’t listed below.

• Zooz Stick/GPIO module/Z-Box hub (recommended for Zooz products)
• Home Assistant (Z-Wave JS)
• SmartThings (install the custom lua driver)
• Hubitat (with custom driver)
• HomeSeer (with Z-Wave Plus plug-in)

---

Lithium Battery Shipping: Due to courier restrictions, this product can only be shipped within the United Kingdom. With this item in your cart your shipping options will be limited and may cost more than our usual rates. Why?

---

Features

• Security alerts: Get instant motion reports to your Z-Wave hub whenever movement is detected.
• More climate data: Monitor temperature outdoors or indoors and use this information to trigger connected devices in your system.
• Smart lighting: program your Z-Wave outdoor lights to come on when the Zooz sensor reports motion and lux levels below your preferred set point
• Power options:
  • Battery power: with 2 CR123A batteries (included)
  • 12-24 V AC/DC terminal connection (power supply not included)
• Works as Z-Wave signal repeater when powered with 12-24 V AC/DC
• 800 series Z-Wave chip: more range for reliable wireless communication
• SmartStart and S2 authenticated security
• Advanced settings to customise your sensor, including the ability to disable reporting for any sensor
• Modern minimal design with a multi-directional mini mounting bracket
• 5-year extended warranty (once registered) and lifetime tech support
• Z-Wave gateway controller required: You need a security-enabled controller to take full advantage of the product.

Specifications

• Z-Wave Region: EU, UK (no Z-Wave LR)
• Z-Wave Chip: 800 series
• Power: 2 CR123A battery (included) or 12-24 V AC/DC 0.5A+ terminals (power supply not included)
• Z-Wave Range: Up to 150 feet line of sight (depending on local conditions)
• Motion Detection: 30 feet
• Operating Humidity: 8%- 100% non-condensing
• Light Sensor Detection Range: 0 – 65535 lux
• Operating Temperature: -10°C to 50°C (with accuracy of ±2°C)
• Dimensions: 59.43mm x 60.96mm x 69.85mm
• Installation: Indoor / Outdoor (IP66 rated)

Resources

• User Manual
• Advanced Settings
• How to power with 12V-24V (YouTube)
• ZSE70 FAQs
• ZSE70 Change log
• ZSE70 Support Portal
• Zooz product registration
• Product number: Zooz ZSE70
• UPC: 853478006704

Package Contents

• 1x Zooz 800 Series Z-Wave Outdoor Motion Sensor ZSE70 (EU/UK 868.42 MHz)
  • Includes 2x CR123A lithium batteries pre-installed
• 1x Wall mounting bracket

Z-Wave hub required.