Zooz Z-Wave XS Open/Close Sensor – 800 Series

The compact Zooz ZSE41 Z-Wave XS Open/Close Sensor Sensor allows you to discreetly protect or automate your home around door/window entry, communicating to your Z-Wave hub/network via its 800 series Z-Wave chip. When connected to your Z-Wave hub, it will tell you exactly if and when a door or window has been opened.

Please note this device uses the UE/UK 868.4MHz frequency and does not support LR (Long Range) Z-Wave functionality.

Automate lighting when you get home from work. Attach it to a kitchen cabinet to monitor access. Put it on a drawer door to safeguard your valuables. Use it in conjunction with your home automation system for notifications so that you’re always kept in the loop, no matter where you are.

You can even use it outside with the optional Waterproof Case for Zooz XS Open/Close Sensor – great for fence gates and mailboxes!

Use the sensor with your home automation system to speak to other Z-Wave devices, like triggering a Z-Wave smart switch to turn lights on when the backdoor is opened within a certain timeframe. With features like low-battery alerts and the 800 series Z-Wave chip for faster, safer connectivity and greater range, the XS Open/ Close Sensor is as dependable as it gets.

XS stands for ‘Extra Small’ – the thickest part is only ~8.5mm thick! All it needs is a single CR2032 coin battery (included) to send data to your hub.

Z-Wave 800 Series

Features the new 800 series Z-Wave chip. Get more range, longer battery life, and quicker reports with the latest technology. Enjoy improved range that allows for more reliable communication, even from the far corners of your home like the attic or garage. Includes the innovative S2 authenticated security and SmartStart, equipped with a unique QR code and pin for easier and safer pairing.

Z-Wave hub/stick required – this sensor runs the 868.42 MHz Z-Wave frequency, as used in the UK and Europe. Grab a Zooz Z-Wave stick here!

Z-Wave Compatibility

Check hub compatibility before buying – does not work with alarm panels. Please contact the friendly team at Zooz for advice before buying if your hub isn’t listed below.

• Zooz Stick/GPIO module/Z-Box hub (recommended for Zooz products)
• Home Assistant (Z-Wave JS)
• SmartThings (install the custom lua driver for advanced functionality)
• Homey (Zooz App for Homey)
• Hubitat (2.2.9 or higher)
• HomeSeer (with Z-Wave Plus plug-in)
• Jeedom
• eedomus
• Ezlo Plus
• Ezlo Secure
• Ring Alarm

---

Lithium Battery Shipping: Due to courier restrictions, this product can only be shipped within the United Kingdom. With this item in your cart your shipping options will be limited and may cost more than our usual rates. Why?

---

Features

• Door/window monitoring: fast and reliable reports are sent to your Z-Wave hub whenever a door or window is open or closed
• Extra small: slim and discreet enough to easily blend in with most frames and surfaces
• Protective surface: coated with rubber oil to prevent corrosion and water leak damage
• NEW 800 chip: more range, faster signal, SmartStart inclusion + S2 security
• Outdoor installation: use the dedicated waterproof cover case for the ZSE41 (sold separately) to mount it anywhere outside
• Powered by a single CR2032 battery (do not use Duracell batteries due to the extra bitter coating that prevents contact)
• SmartStart for easier and safer pairing
• Advanced settings to customise your sensor
• 5-year extended warranty (once registered) and lifetime tech support
• Z-Wave gateway controller required: You need a security-enabled controller to take full advantage of the product

Specifications

• Z-Wave Region: EU/UK (no Z-Wave LR)
• Z-Wave Chip: 800 series
• Power: 1x CR2032 battery (included)
• Magnet to sensor max gap: 0.25′
• Wireless Range: Up to 150 feet line of sight (depends on local conditions)
• Operating Temperature: 0°C – 40°C
• Dimensions (approx):
  • 48mm x 25.5mm x 7.6mm
  • Magnet: 32mm x 7.6mm x 7.6mm
• Installation: Indoor or outdoor use with waterproof case (sold separately)

Resources

• User Manual
• Advanced Settings
• ZSE41 Frequently Asked Questions
• ZSE41 Change log
• ZSE41 Support Portal
• Zooz product registration
• Product number: Zooz ZSE41
• UPC: 853478006414

Package Contents

• 1x Zooz 800 Series Z-Wave XS Open/Close Sensor ZSE41 (EU/UK 868.42 MHz)
  • Includes CR2032 lithium battery pre-installed
• 1x Foam tape (pair)
• 2x Screws
• 1x Opening pick tool
• 1x Printed user guide

Z-Wave hub required.