Zooz Z-Wave XS Temperature & Humidity Sensor – 800 Series

The compact Zooz ZSE44 Z-Wave XS Temperature & Humidity Sensor is perfect for spot monitoring in spaces where your smart thermostat doesn’t reach, communicating to your Z-Wave hub/network via its 800 series Z-Wave chip.

Please note this device uses the UE/UK 868.4MHz frequency and does not support LR (Long Range) Z-Wave functionality.

Just stick it to the flat surface of your choice with the supplied adhesive tape for 1-minute installation. We recommend using the included dedicated mounting bracket if you’d like to install the sensor outdoors. Always keep the device out of direct sunlight and rain or snow.

Install the device in your bedroom to prepare just the right temperature for the night. Mount it in the garage or in your conservatory to monitor where humidity and temperature are most likely to change quickly. Use it alongside your Z-Wave-enabled home automation system to trigger other Z-Wave devices to control the climate and environment.

XS stands for ‘Extra Small’ – the sensor is only ~10mm thick! All it needs is a single CR2450 coin battery (included) to send data to your hub.

Z-Wave 800 Series

Features the new 800 series Z-Wave chip. Get more range, longer battery life, and quicker reports with the latest technology. Enjoy an improved range that allows for more reliable communication, even from the far corners of your home like the attic or garage. Includes the innovative S2 authenticated security and SmartStart, equipped with a unique QR code and pin for easier and safer pairing.

Z-Wave hub/stick required – this sensor runs the 868.42 MHz Z-Wave frequency, as used in the UK and Europe. Grab a Zooz Z-Wave stick here!

Z-Wave Compatibility

Check hub compatibility before buying – does not work with alarm panels. Please contact the friendly team at Zooz for advice before buying if your hub isn’t listed below.

• Zooz Stick/GPIO module/Z-Box hub (recommended for Zooz products)
• Home Assistant (Z-Wave JS)
• OpenHAB
• SmartThings (install the custom lua driver for advanced functionality)
• Homey (Zooz App for Homey)
• Hubitat (2.3.0 or higher)
• HomeSeer (with Z-Wave Plus plug-in)
• Jeedom
• eedomus
• Ezlo
• Ring Alarm (temperature reports only)

---

Lithium Battery Shipping: Due to courier restrictions, this product can only be shipped within the United Kingdom. With this item in your cart your shipping options will be limited and may cost more than our usual rates. Why?

---

Features

• Temperature sensor: track air temperature in the room of your choice to adjust your smart thermostat with more accuracy than ever
• Humidity sensor: get notified if the humidity drops or rises above the set level and trigger your smart (de)humidifier to keep the climate of your sunroom or living room steady
• Small and discreet: The simple and slim design helps blend the sensor with your interior for the invisible type of monitoring you’d expect from a modern sensor
• Outside installation: Mount it on your covered porch or under the eve, just make sure to keep it away from direct rain and sun. The mounting bracket is now included with the device and recommended for outdoor installation
• New 800 series Z-Wave chip: get more range, longer battery life, and quicker reports with the latest technology
• Powered by a single CR2450 battery (do not use Duracell batteries due to the extra bitter coating that prevents contact)
• S2 and SmartStart for extra security
• 5-year extended warranty (once registered) and lifetime tech support
• Z-Wave gateway controller required: You need a security-enabled controller to take full advantage of the product

Specifications

• Z-Wave Region: EU/UK (no Z-Wave LR)
• Z-Wave Chip: 800 series
• Power: 1 CR2450 battery (included)
• Mounting Bracket (included)
• Wireless Range: Up to 300 feet line of sight with traditional Z-Wave mesh (depends on local conditions)
• Operating Temperature: -15°C – 40°C
• Dimensions (approx): 56mm x 33mm x 5mm
• Installation: Indoor or outdoor under eve in the bracket (keep it away from direct rain and sun)

Resources

• User Manual
• Advanced Settings
• ZSE44 Frequently Asked Questions
• ZSE44 Change log
• ZSE44 Support Portal
• Zooz product registration
• Product number: ZSE44
• UPC: 853478006445

Package Contents

• 1x Zooz 800 Series Z-Wave XS Temperature & Humidity Sensor ZSE44 (EU/UK 868.42 MHz)
  • Includes CR2450 lithium battery pre-installed
• 1x Mounting bracket
• 1x Foam tape
• 1x Opening pick tool
• 1x Printed user guide

Z-Wave hub required.