Zooz Z-Wave XS Water Leak Sensor – 800 Series

The compact Zooz ZSE42 Z-Wave XS Water Leak Sensor reliably detects water presence so that you can respond quickly to leaky pipes, water escape or a boiler room immersed in water, communicating to your Z-Wave hub/network via its 800 series Z-Wave chip.

Please note this device uses the UE/UK 868.4MHz frequency and does not support LR (Long Range) Z-Wave functionality.

When paired with your Z-Wave hub, it will send instant notifications and alerts to your smartphone or computer, whether it’s a flood emergency or a low-battery alert. Connect the Water Leak Sensor to other Z-Wave devices for advanced home automation scenarios: trigger your smart water valve actuator to immediately shut off flow or pair it with an alarm siren located on the main floor to ensure a fast response.

XS stands for ‘Extra Small’ – the sensor is only ~11mm thick and easy to fit under cabinets, appliances, and pipes. Just place it on any flat surface you’d like to monitor for the most hassle-free installation possible. The device is sealed and can take a splash of water but it’s not completely waterproof. It cannot be submerged in water or used to monitor water presence in pools or aquariums.

All it needs is a single CR2450 coin battery (included) to send instant reports to your hub if a leak is detected.

Z-Wave 800 Series

Features the new 800 series Z-Wave chip. Get more range, longer battery life, and quicker reports with the latest technology. Enjoy an improved range that allows for more reliable communication, even from the far corners of your home like the attic or garage. Includes the innovative S2 authenticated security and SmartStart, equipped with a unique QR code and pin for easier and safer pairing.

Z-Wave hub/stick required – this sensor runs the 868.42 MHz Z-Wave frequency, as used in the UK and Europe. Grab a Zooz Z-Wave stick here!

Z-Wave Compatibility

Check hub compatibility before buying (doesn’t work with alarm panels, not supported by Ring). Please contact the friendly team at Zooz for advice before buying if your hub isn’t listed below. Please also see this article from Zooz.

• Zooz Stick/GPIO module/Z-Box hub (recommended for Zooz products)
• Home Assistant (Z-Wave JS)
• SmartThings (install the custom lua driver)
• Homey (Zooz App for Homey)
• Hubitat (2.2.9 or higher)
• HomeSeer (with Z-Wave Plus plug-in)
• Jeedom
• eedomus
• Ezlo

---

Lithium Battery Shipping: Due to courier restrictions, this product can only be shipped within the United Kingdom. With this item in your cart your shipping options will be limited and may cost more than our usual rates. Why?

---

Features

• Water leak alerts: get notified of water presence right away once the sensor is added to your Z-Wave hub
• Extra small: fits easily under appliances and furniture for discreet and dependable monitoring
• New improved cover: the sensor is fully sealed and IP66-rated
• New 800 series Z-Wave chip: get more range, longer battery life, and quicker reports with the latest technology
• Powered by a single (included) standard CR2450 battery (Do not use Duracell batteries due to the extra bitter coating that prevents contact)
• S2 and SmartStart for the most secure inclusion
• 5-year extended warranty (once registered) and lifetime tech support
• Z-Wave gateway controller required: You need a security-enabled controller to take full advantage of the product.

Specifications

• Z-Wave Region: EU, UK (no Z-Wave LR)
• Z-Wave Chip: 800 series
• Power: 1 CR2450 battery (included)
• Wireless Range: Up to 400 feet line of sight (depending on local conditions)
• Operating Temperature: 0°C – 40°C
• Dimensions (approx): 61mm x 35.5mm x 10.2mm
• Installation: Indoor/outdoor under eve (IP66)

Resources

• User Manual
• Advanced Settings
• ZSE42 FAQs
• ZSE42 Change log
• ZSE42 Support Portal
• Zooz product registration
• Product number: Zooz ZSE42
• UPC: 853478006421

Package Contents

• 1x Zooz 800 Series Z-Wave XS Water Leak Sensor ZSE42 (EU/UK 868.42 MHz)
• 1x CR2450 lithium battery
• 1x Opening coin tool
• 1x Printed user guide

Z-Wave hub required.